GREER Company MICROGUARD 434, Руководство по калибровке

Страница: 31 / 39

GREER COMPANY
GREER COMPANY GREER COMPANY
GREER COMPANY
Crane Systems Crane Systems Crane Systems Crane Systems
GREER COMPANY 1918 EAST GLENWOOD PLACE SANTA ANA, CALIFORNIA 92705 PN W453201A 08/10/00
MicroGuard
®
434/500 CALIBRATION MANUAL TEL: 714) 259-9702 FAX: 714) 259-7626
31
OF
39
COMMAND 12 DIGITAL INPUTS
COMMAND 12 DIGITAL INPUTS COMMAND 12 DIGITAL INPUTS
COMMAND 12 DIGITAL INPUTS
The logic status of digital inputs is displayed using this Command.
The inputs can be high or low. Low is indicated by zero and high is indicated by 1.
COMMAND 12 DIGITAL INPUTS COMMAND 12 DIGITAL INPUTS COMMAND 12 DIGITAL INPUTS COMMAND 12 DIGITAL INPUTS
DIGITAL INPUTS DIGITAL INPUTS DIGITAL INPUTS DIGITAL INPUTS
0.
SWING SWITCH INPUTS
1.
SWING SWITCH INPUTS
2.
SWING SWITCH INPUTS
3.
SWING SWITCH INPUTS
4.
INTERLOCK/ALT CHART INPUTS
5.
INTERLOCK/ALT CHART INPUTS
6. NOT USED
7. NOT USED
8. NOT USED
9. NOT USED
A ATB
B ATB
C NOT USED
D NOT USED
E NOT USED
0 .
ENTER THE CALIBRATION MODE AND CALIBRATION CODE, IF NOT ALREADY DONE.
REFER TO PAGE 5.
1.
CHOOSE MENU UP OR MENU DOWN AND GO TO 12 DIGITAL INPUTS. .....................................
2 or 3
2 or 3 2 or 3
2 or 3
2.
START 12 DIGITAL INPUTS. .......................................................................................................................
1 11 1
THE DISPLAY WILL READ THE STATUS OF ALL DIGITAL INPUTS.
3.
EXIT THE ROUTINE. .....................................................................................................................................
6 66 6
REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4 REVIEW THE SAMPLE DISPLAY SCREEN ON PAGE 4.
Use the designated arrow key (
1, 2, 3, 4, or 6
1, 2, 3, 4, or 6 1, 2, 3, 4, or 6
1, 2, 3, 4, or 6
) appearing to the right of each step
when ENTERING or EXITING a COMMAND
and to CHOOSE, START, CONFIRM, ABORT, RESET, or ENTER an action.