OPERATION
40
500ze YM180 (12
−
2011)
10. Remove the hopper safety arm from between
the frame of the machine and the hopper and
place the safety arm into the storage clips.
11. Turn on the machine and press the bottom of
the Hopper raise / lower switch to lower the
hopper.
WARNING:Lift arm pinch point. Stay
clear of hopper lift arms.
12. Pull the safety pin from the rear bumper, pull
the handle, and open the water tank door.
13. Disconnect the water tank door retainer chain
from the bracket.
14. Carefully clean the areas surrounding the
water pump. Do not spray water into the
electronic components above the pump
15. Close and secure the water tank door. Attach
the water tank door retainer chain to the
bracket.
16. Clean the brushes and vacuum head area.
