OPERATION
37
500ze YM180 (12
−
2011)
7. Open the vacuum adapter cover and attach
the wander hose to the adapter.
NOTE: Take care when unlatching the wander
hose vacuum adapter cover latches. The latches
are spring loaded.
8. Turn on the machine.
9. Place the Transit / Work mode switch into the
Work Mode 1 (middle) position.
10. Press the bottom of the Wander hose switch
to start the vacuum.
11. Adjust the Vacuum fan speed knob for
cleaning conditions.
12. Use the wander hose for cleaning.
NOTE: If the wander hose becomes blocked,
carefully squeeze along the entire length of hose
until the blockage is found. Carefully squeeze the
blocked area until the obstruction breaks loose.
13. When finished using the wander hose, press
the top of the Wander hose switch to turn off
the vacuum.
14. Turn off the machine.
15. Remove the wander hose from the adapter.
Secure the vacuum adapter cover over the
adapter opening and close the access doors.
16. Turn on the machine and raise the hopper.
Secure the wander hose onto the top of the
hopper. Remove the hopper inlet blanking
plate from the vacuum port and return it to the
storage location inside the cab. Lower the
hopper.
