Gree GWH18YE-S6DBA2A/I, Руководство по обслуживанию

Страница: 31 / 108

Service Manual
(4) Link(This function is APPlicable to some models)
S elect a m aster device. W hen the e nvironm ent satisfies the param eters as set in the m aster device, slave devices w ill execute
comm ands to realize devices linkage.
Step l ^ e t the param eters of m aster device (Select m aster device, select environm ent parameters, select m aster device status).
Tap n at the top right corner of the homepage "Device". Select "Link" and enter the page "Add linkage". Tap "Device/Param " to
enter the page "Select device". Take "baby room" as an example. Tap "babyroom".
Enter the page "Select environm ent parameters".
When babyroom
°CTemp
/>Mode
(Don/off
Tap "Temperature" to enter the page "Select tem perature param eter". Slide up o r down to adjust tem perature. Tap "U pper limit" or
"Lower limit".
Tap "Mode" and "On/Off" to select the status of m aster device. Then tap "Save".
Step 2: Set time param eter fo r linkage. Tap "Time parameter" to enter the page "Set time". Slide
setting time.
rightwards to turn on the
Tap "Execution time"; then tap "Start" and "Stop" to set start time and stop time respectively. Tap "OK" at the top right corner to save the
setting.
28
• •
Installation and Maintenance