Great Wall Florid, Руководство по обслуживанию

Страница: 266 / 281

259 Vehicle Body
Rear Bumper
Components
Rear bumper removal
1. Remove the trim panel.
Screw off the cross slot & concave hexagon head self-tap-
ping screw and large washer subassembly, which are on the
rear bumper's left & right trim panel, the rear bumper trim
panel buckle, and the expansion button whose bottom is con-
nected with the bumper body. Then pull the left & right trim
panel of the rear bumper off.
1
13
9
5
3
12
7
4
14
16
15
11
18
6
1
1
1
13
13
13
11
17
3
2
10
8
Rear bumper body
Rear bumper left side trim panel
Cross slot & con-
cave hexagon head
self-tapping screw
and large washer
subassembly
Rear bumper trim
panel buckle
Expansion button
1. Cross slot & concave hexagon head self-tapping screw and large
washer subassembly
2. Rear mounting bracket LH of the rear bumper
3. Rear bumper mounting bolt
4. Hexagon nut for flange face
5. Rubber cushion of the rear bumper central mounting bracket
6. Rear bumper central mounting bracket bolt
7. Central left mounting bracket of the rear bumper
8. Central right mounting bracket of the rear bumper
9. Rear mounting bracket RH of the rear bumper
10. Front mounting bracket RH of the rear bumper
11. Rear bumper trim panel buckle
12. Rear bumper right trim panel
13. Expansion button
14. Rear bumper body
15. Rear bumper plastic buffer anchor
16. Rear bumper drawbar close lid
17. Rear bumper left trim panel
18. Front mounting bracket LH of the rear bumper