Great Wall Florid, Руководство по обслуживанию

Страница: 189 / 281

GWFLORID Maintenance Manual 182
VA-882 remote controller central door lock's connection wire definition
The door lamp signal and side window signal uses a triode transistor emitter open-drain output.
Headlight (+) test
Right turn signal lamp output (12 V)
Sunroof positive output (12 V) (reserve)
Power door and window negative output (100 mA)
Central door lock unlocking positive output (12 V)
Central door lock locking positive output (12 V)
Key insert diagnostic (-)
Left turn signal lamp output (12 V)
Reading lamp negative output (3.3 A)
Fastener switch lock diagnostic
Power supply ON diagnostic (12 V)
Power supply negative pole
Trunk door motor
Trunk door switch
Power supply positive pole (12 V)
Door lamp signal
Manual lock signal
Manual unlock signal
Front left door diagnostic
Front right door diagnostic
Front right door switch
Driver side door switch
Manual switch lock rocker switch
No connection
Door lamp indicator
10 kΩ
+ 12 V
Ground
Connected car key ON wire
No connection
Power supply positive pole
Front reading lamp
Actuator
When the actuator is at the unlock
position, the inner switch is connected
Connected side window remote
controller negative trigger
Power sunroof relay
Power supply 12 V
Driver side door and
window switch
Negative
Positive
Power supply positive pole
Headlight switch
10
22
1 10
11 22
1
11
Controller plug front view
Controller socket front view
The door lamp signal and side window
signal uses a triode transistor emitter
open-drain output.
1. Headlight
Connected to the positive wire of the vehicle's headlight, this wire will hold 12 V when the headlight is turned on.
2. Right turn signal lamp
Connected to the positive wire of the vehicle's right turn signal lamp, this wire will hold 12 V when the wire is in use.
3. Sunroof positive output (reserve)
Connected to one end of the wire package of the window lift relay, this wire will output 12 V when the key is
turned to the ON position. After the key is pulled out, the wire will maintain 12 V for 60 seconds.
4. Side window negative output
Connected to the negative trigger wire of the side window remote controller, this wire will output a negative
signal for 10 seconds after the door is remotely locked by the system.
5. Central door lock unlocking output
Connected to the unlock wire of the central remote controller actuator, this wire will output 12 V when
unlocking.