Great Wall Florid, Руководство по обслуживанию

Страница: 14 / 281

7 Overview
Protection band
Screwdriver
5. Maintenance methods for wire harness connector ter- Maintenance methods for wire harness connector ter- for wire harness connector ter-
minals.
(a) Use an airgun or rag to clean the contact points if the
terminals become dusty. Do not use sandpaper to clean
it, as that could damage the electroplated layer.
(b) If the contact pressure seems unusual, change it to a
socket of the same type.
(c) Any terminal that has been damaged, deformed, or
corroded must be changed. If the terminal is not locked
to the case, then the case needs to be replaced too.
Correct
Incorrect
6. Clip removal and installation.
Methods for removal and installation of the vehicle's body part clips are shown in the table below.
Remark: If the clip is damaged during operation, it must be replaced with a new one.
Shape Removal / Installation
Vise
Clip extractor
Protection band
Screwdriver