GREAT PLAINS 5109, Руководство оператора

Страница: 24 / 38

07/11/2018 Table of Contents Index 566-224M
TC5109-5323 Table of Contents Index Operating Instructions 20
Field Operation
This implement is designed to be pulled in the field with
the machine engaged (including wide turns). Lifting for
short distances to clear residue clogs is acceptable.
Lifting for tight turns or reverse moves is required.
Equipment Damage Risk:
Lift for tight turns and reverse moves. Tight turns can result in
a section moving backward. Never back up with harrows on
the ground. If the inside tire stops or rolls backward, the turn is
tight and requires lift.
Field Set-Up Checklists
Use the following tables to develop a final checklist for
your tractor/Turbo-Chisel configuration. Additional or
fewer steps may be necessary depending on tractor
features, Turbo-Chisel options and planting accessories.
General Operation and In-Field
Adjustments
1. Remove the transport pins, see “ Transport Locks ”
on page 15 and unfold machine. Make sure the fold
cylinders are fully extended to allow the wings to fully
flex in the field.
2. If possible have someone observe the machine
during first time operation for levelness, front to rear
and wings to center frame.
Mechanical Checklist (Tractor Hitching) Page
Turbo-Chisel hitched 13
Hitch pin locked
Safety chain secured to tractor or leading
implement
13
Parking jack stowed 13
Electrical Checklist Page
Verify electrical hookups solid, or connector
securely stowed if not using lights in field.
14
Hydraulic System Checklist Page
Check tractor hydraulic reservoir full -
Make hydraulic connections 14
Inspect connections for leaks -
Unfold Implement