GREAT PLAINS 5109 Скачать руководство пользователя страница 7

Страница: 7 / 38

TC5109-5323

Table of Contents

Index

Important Safety Information

07/11/2018

Table of Contents

Index

566-224M

Transport Machinery Safely

Maximum transport speed for implement is 20 mph (32

kph), 13 mph (22 kph) in turns. Some rough terrains

require a slower speed. Sudden braking can cause a

towed load to swerve and upset.



Do not tow an implement or nurse tank that weighs more

than 1.5 times the weight of towing vehicle.



Carry reflectors or flags to mark Turbo-Chisel in case of

breakdown on the road.



Keep clear of overhead power lines and other
obstructions when transporting. Refer to transport

dimensions under “

TC Specifications and Capacities

” on

page 27.



Do not exceed 20 mph. Never travel at a speed which does
not allow adequate control of steering and stopping.

Reduce speed if towed load is not equipped with brakes.



Reduce speed on rough roads.



Comply with national, regional and local laws.



Do not fold or unfold the Turbo-Chisel while the tractor is

moving.

Shutdown and Storage



Lower Turbo-Chisel, put tractor in park, turn off engine,

and remove the key.



Secure Turbo-Chisel using parking jack provided.



Detach and store Turbo-Chisel in an area where children
normally do not play.

Tire Safety

Tire changing can be dangerous. Employ trained

personnel using correct tools and equipment.



When inflating tires, use a clip-on chuck and extension

hose long enough for you to stand to one side–not in front

of or over tire assembly. Use a safety cage if available.



When removing and installing wheels, use wheel-handling
equipment adequate for weight involved.

Содержание 5109







































Результаты поиска

Содержание 5109

Отзывы:

Похожие инструкции для 5109

Бренды по названию

Популярные бренды

GREAT PLAINS 5109, Руководство оператора

Результаты поиска

Содержание 5109

Отзывы:

Похожие инструкции для 5109

Бренды по названию

Популярные бренды