GREAT PLAINS 5109, Руководство оператора

Страница: 22 / 38

07/11/2018 Table of Contents Index 566-224M
TC5109-5323 Table of Contents Index Operating Instructions 18
Operating Instructions
This section covers general operating procedures.
Experience, machine familiarity, and the following
information will lead to efficient operation and good
working habits. Always operate farm machinery with
safety in mind.
Pre-Start Checklist
Perform the following steps before transporting the
Turbo-Chisel to the field.
 Carefully read “ Important Safety Information ” on
page 1.
 Lubricate Turbo-Chisel as indicated under
“ Lubrication ” on page 25.
 Check all tires for proper inflation, “ Tire Inflation
Chart ” on page 28.
 Check all bolts, pins, and fasteners. Torque as
shown in “ Torque Values Chart ” on page 29.
 Check Turbo-Chisel for worn or damaged parts.
Repair or replace parts before going to the field.
Check hydraulic hoses, fittings, and cylinders for leaks.
Repair or replace before going to the field.
High Pressure Fluid Hazard:
Relieve pressure and shut down tractor before connecting,
disconnecting or checking hydraulic lines. Use a piece of
paper or cardboard, NOT BODY PARTS, to check for leaks.
Wear protective gloves and safety glasses or goggles when
working with hydraulic systems. Escaping fluid under pressure
can have sufficient pressure to penetrate the skin causing
serious injury. If an accident occurs, seek immediate medical
assistance from a physician familiar with this type of injury.