GREAT PLAINS 5109 Скачать руководство пользователя страница 8

Страница: 8 / 38

07/11/2018

Table of Contents

Index

566-224M

TC5109-5323

Table of Contents

Index

Important Safety Information

Practice Safe Maintenance



Understand procedure before doing work. Use proper

tools and equipment. Refer to this manual for additional

information.



Work in a clean, dry area.



Lower implement, put tractor in park, turn off engine,
and remove key before performing maintenance.



Make sure all moving parts have stopped and all system

pressure is relieved.



Disconnect battery ground cable (-) before servicing or

adjusting electrical systems or before welding on Turbo-
Chisel.



Inspect all parts. Make sure parts are in good condition

and installed properly.



Remove buildup of grease, oil or debris.



Remove all tools and unused parts from implement

before operation.

Safety At All Times

Thoroughly read and understand the instructions in this

manual before operation. Read all instructions noted on

the safety decals.



Be familiar with all Turbo-Chisel functions.



Operate machinery from the driver’s seat only.



Do not leave Turbo-Chisel unattended with tractor engine

running.



Do not stand between tractor and implement, or

implement and nurse tank, during hitching.



Keep hands, feet and clothing away from power-driven
parts.



Wear snug-fitting clothing to avoid entanglement with

moving parts.



Watch out for wires, trees, etc., when folding and raising
Turbo-Chisel. Make sure all persons are clear of working

Содержание 5109







































Результаты поиска

Содержание 5109

Отзывы:

Похожие инструкции для 5109

Бренды по названию

Популярные бренды

GREAT PLAINS 5109, Руководство оператора

Результаты поиска

Содержание 5109

Отзывы:

Похожие инструкции для 5109

Бренды по названию

Популярные бренды