GRE KWOV436 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 64

GRE KWOV436 Скачать руководство пользователя страница 31

31

This finishes the assembly of the structure. Now all that needs doing is to position the edges (see the edges chapter).

At this time of the assembly:

• The skimmer is positioned facing the prevailing winds.

• The panel of the structure on which the removable stepladder will be located has been decided.

TRIMMINGS L

• Position the L trimming on the ends of the boards.

• Cut off the excess part of the trimming according to the height of the pool if necessary (figure 21).

• Fix trimming L using 3 screws 4 x 60 uniformly distributed over the height of the piece (figure 22).

Figure 22

Figure 21

REINFORCEMENTS AROUND THE COLUMNS

Reinforcements are installed at each side of the columns.

• Locate the position of the lateral holes in each of the reinforcements.

• Drill the 2 reinforcements with a Ø 10 mm bit for wood.

• Relocate the 2 reinforcements around the column and fix them using 4 TRCC [COACH BOLTS] screws inserted form the outside

towards the inside.

• Fix the reinforcements from the inside.

Fixing screw

of the screwed

trimming.

Align the trimming with

the upper part of the

column.

• Position the trimming of the column and fix it using two screws for wood included (4x60).

Figure 23

TRCC screw

Ø10x70

Look for us in our

YouTube channel to

help you with the

assembly.

«
...
29
30
31
32
33
...
»

Содержание KWOV436

































































Отзывы:

Нет отзывов