GRE KWOV436 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 64

GRE KWOV436 Скачать руководство пользователя страница 3

3

Carefully read this information and keep it for later consultations.

ATTENTION!

Congratulations on your choice. The model you have chosen has been especially designed for simple and

rapid installation, but some precaution is necessary for the good use of your pool.

Before starting with the installation and assembly of your pool, consider the current local regulation about

on ground and in ground pools.

The use of the pool kit includes respecting the safety instructions described in the maintenance manual
and instructions for use.
If the safety regulations are not respected serious damage for your health and specially for that of children
may occur.
Carefully read this manual and pay attention to the illustrations before starting to assemble the pool. In the
case that the assembly does not follow this manual the guarantee may be rejected in the case of failure.

The information appearing in this installation manual shows exactly how it should be done.

Nevertheless, the illustrations in the same are to explain the assembly process. Contractual elements will

not be considered regarding the shape, the colours and the aspects shown in the illustrations.

Manufacturas Gré in its commitment to ongoing improvement of their products, reserves the right to modify

at any time and without previous warning the features, the technical details, the standardized equipment

and the options of its products.

Pictograms

In this manual, the paragraphs including important information for the safety or operation are highlighted

with the following symbols:

Compulsory

Attention

Observation

Suggestions

Look for us in our

YouTube channel to

help you with the

assembly.

«
1
2
3
4
5
...
»

Содержание KWOV436

































































Отзывы:

Нет отзывов