M10 JEWEL Machine - Electronic Engraving Machine
. 32
First Contact
1. Place the 3 ring/outside engraving jaws (D9) onto the chuck (1) and (2)
(the white arrows (F2) must be apart from the zone of tightening).
3. Place the ring so that the mark is at the bottom and is aligned with the directional arrow (J3).
4. Using the tightening ring (K) of the chuck, fasten the ring firmly in place so it will remain
immobile during engraving.
Proper fastening contributes towards reducing machine noise and vibrations during engraving.
Check that the object is properly fastened so it does not pop out during engraving and
that no object poses an obstacle to the movable parts’ movements.
2. Mark the middle of the text length to be engraved on the Outside of the ring :
Outside diameter
Middle of the text
length
Outside Engraving
Positioning a ring onto the jaws and Outside Engraving
1/3
5. Touch (START) on the control panel of the machine and follow the instructions indicated on
the screen of the computer:
