M10 JEWEL Machine - Electronic Engraving Machine
. 20
First Contact
Wide ring - Inside Engraving
(width
: 4 to 8 mm)
(engraving diameter : 12,5 to 25 mm)
Diamond tip (D1) for rings mounted in the
center of the chuck.
The 3 rings/bracelets jaws (D3) mounted on
Blue position.
Wide ring montage procedure - Inside Engraving
described pages 23-24.
Thin bracelet - Inside Engraving
(width
: 3 to 12 mm)
(engraving diameter : 45 to 74 mm)
Diamond tip (D2) (adjustable) for bracelets
mounted in the center of the chuck.
The 3 rings/bracelets jaws (D3) mounted on
Yellow position.
Fine Bracelet montage procedure - Inside
Engraving described pages 25-27.
Inside Engraving
For the Inside Engraving, 4 engraving montages are possible according to the sizes of the object
to be engraved :
Thin ring - Inside Engraving
(width
: 1.5 to 4 mm)
(engraving diameter : 12 to 25 mm)
Diamond tip (D1) for rings mounted in the
center of the chuck.
The 3 rings/bracelets jaws (D3) mounted on
Red position.
Fine ring montage procedure - Inside Engraving
described pages 21-22.
Wide bracelet - Inside Engraving
(width
: 11 to 20 mm)
(engraving diameter : 45 to 74 mm)
Diamond tip (D2) (adjustable) for bracelets
mounted in the center of the chuck.
The 3 rings/bracelets jaws (D3) mounted on
Green position.
Wide Bracelet montage procedure - Inside
Engraving described pages 28-30.
