First Contact
M10 JEWEL Machine - Electronic Engraving Machine
. 31
Thin bracelet - Outside Engraving
(width
: 3 to 12 mm)
(engraving diameter : 50 to 80 mm)
Outside engraving diamond tip holder mounted
in the location (E) above the chuck and equipped
with the diamond tip (D7) for bracelets.
The 3 rings/bracelets jaws (D3) mounted on
Yellow position
Fine bracelet montage procedure - Outside
Engraving described pages 35-37
Wide bracelet - Outside Engraving
(width
: 12 to 20 mm)
(engraving diameter : 50 to 80 mm)
Outside engraving diamond tip holder mounted
in the location (E) above the chuck and equipped
with the diamond tip (D7) for bracelets.
The 3 rings/bracelets jaws (D3) mounted on
Green position
Wide bracelet montage procedure - Outside
Engraving described pages 38-40
Ring - Outside Engraving
(width : 1.5 to 6 mm)
(engraving diameter : 13.5 to 25 mm)
Outside engraving diamond tip holder mounted
in the location (E) above the chuck and
equipped with the diamond tip (D8) for rings.
The 3 rings/Outside engraving (D9) are
mounted onto the chuck
Ring montage procedure - Outside Engraving
described pages 32-34
Outside Engraving
For the Outside Engraving, 3 engraving montages are possible according to the sizes of the
object to be engraved :
