background image

M10 JEWEL Machine - Electronic Engraving Machine . 2 

First Contact

Importer's  address

GravoTechMarking SAS reserves the right to modify the information contained in this document without 

notice.

TYPE OF MACHINE 

M

10 JEWEL Electronic Engraving Machine 

 

MANUFACTURER 

GRAVOTECH MARKING SAS 

 

 

 

 

 

BP 15 - Z.I. - 10600 LA CHAPELLE SAINT LUC - FRANCE

This publication and its contents are proprietary to GravoTech Marking SAS (trademark Gravograph), and are intended 

solely for the contractual use of GravoTech Marking SAS customers.

While reasonable efforts have been made to assure the accuracy of this manual, GravoTech Marking SAS shall not be liable 

for errors contained herein or for incidental or consequential damage in connection with the furnishing, performance, or 

use of this material.

GravoTech Marking SAS reserves the right to revise this manual and make changes from time to time without any 

obligation by GravoTech Marking SAS to notify anybody of such revision or changes.

GravoTech Marking SAS can not be held liable for any problems arising out of the application or use of any products, circuits, 

or software described herein. Neither does it convey a license under its patent rights nor the patent rights of third parties.

GravoTech Marking SAS provides no warranties whatsoever on any software used in connection with a Gravograph Laser 

Engraving System, express or implied. Neither does it guarantee software compatibility with any off-the-shelf software 

package or any software program that has not been written by GravoTech Marking SAS.

Intended use of this system must be followed within the guidelines of this manual. In no event will GravoTech Marking 

SAS be liable for any damages caused, in whole or in part, by customer, or for any economic loss, physical injury, lost 

revenue, lost profits, lost savings or other indirect, incidental, special or consequential damages incurred by any person, 

even if GravoTech Marking SAS has been advised of the possibility of such damages or claims.

Gravograph is a registered trademark of GravoTech Marking SAS.

Windows is a registered trademark of Microsoft Corporation. 

(c) GravoTech Marking SAS, 2012

All Rights Reserved.

Содержание M10 JEWEL


























































Отзывы: