GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors 04/2011
4
You will need five extension leads, Order No. 3935.18, to connect the aileron, landing
flap and retract servos to the receiver.
Each aileron servo lead requires an extension lead, Order No. 3935.32, while the
landing flap leads require extension leads, Order No. 3935.11.
Foam rubber is required for protecting the receiver and battery from shock damage.
Adhesives
Fast-setting epoxy, e.g. UHU plus schnellfest, Order No. 962
Slow-setting epoxy, e.g. UHU plus endfest 300, Order No. 950.15
Wood glue, e.g. UHU Holzleim express, Order No. 958.60
UHU hart, e.g. Order No. 534.35
UHU ALLESKLEBER Kraft, Order No. 1096
Cyano-acrylate, e.g. Order No. 5821
Thread-lock fluid, e.g. Order No. 952
Items required to fly the model
(not included)
Fuel based on synthetic oil, to suit engine
Fuel filter, e.g. Order No. 1650.1
Fuel tubing, e.g. Order No. 1643.1L for glowplug engines
Fuel tubing, e.g. Order No. 1325.2 for petrol engines
Manual fuelpump, e.g. Order No. 6870
Glowplug energizer battery with plug clip, e.g. Order No. 3248
Electric starter, e.g. Order No. 1628
Starter battery, e.g. Order No. 2592
Tools required
(not included)
Set of cross-point screwdrivers, pointed-nose pliers, flat-nose pliers, side-cutters,
balsa knife or razor blade, set of twist drills, universal glowplug spanner, pencil or felt-
tip pen, fine-tip soldering iron.
Assembling the YAK 11 RENO
Please don’t start assembling the model until you have checked the kit components
and the building instructions, and are familiar with the construction procedure. If you
are not happy with any component, kindly inform your model shop without delay.
