GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten!
0058434
11/2007
19
101 Door frame
2
Mahogany
2 x 3 x 300 mm overall
102 Door frame
2
Mahogany
1 x 5 x 260 mm overall
103 Door, two-part
2
Mahogany
Laser-cut, 2 x 2 mm
104 Door window frame
2
Mahogany
1 x 5 x 120 mm
105 Glazing
12
Plastic
150 x 200 x 0.5 mm overall
106 Front internal cladding
1
Mahogany
Laser-cut, 2 mm
107 Rear internal cladding
1
Mahogany
Laser-cut, 2 mm
108 Side internal cladding
2
Mahogany
Laser-cut, 2 mm
109 Wheelhouse floor
1
Mahogany
Laser-cut, 2 mm
110 Support rail
2
Spruce
100 x 5 x 5 mm
111 Door frame
2
Mahogany
2 x 3 x 260 mm
112 Forward door
2
Mahogany
Laser-cut, 1 mm
113 Door hinge
4
Brass rod
1.5 Ø x 8 mm
113a Door hinge
4
Plastic
Ready made, Order No. 67
114 Door fittings plate
4
Brass
12 x 4 x 0.5 mm, as plan
115 Door handle
4
Brass rod
1.0 Ø x 15 mm, as plan
116* Steering wheel
1
Wood
Ready made
117 Steering console
1
Mahogany
6 x 6 x 50 mm
118 Roof cornice
1
Mahogany
4 x 4 x 440 mm overall
119 Top flange
1
Mahogany
3 x 5 x 450 overall
120* Navigation lantern
2
Plastic
Ready made
121 Lantern bracket
2
ABS
Laser-cut
122 Lantern bracket support
4
Beech
4 Ø x 4 mm
123 Lamp mast
1
Mahogany
6 x 6 x 200 mm
124 Reinforcement
4
Mahogany
Laser-cut, 2 mm
125 Lamp platform
2
Mahogany
Laser-cut, 2 mm
126 Lamp console
2
Mahogany
Laser-cut, 2 mm
127 Transverse beam
1
Mahogany
Laser-cut, 2 mm
128 Lamp mast truck, two-part
1
Mahogany
Laser-cut, 4 mm
129* Mast lamp
2
Plastic
Ready made
130 Ring
6
Brass
Ready made, Order No. 315
131 Mast console, three-part
1
ABS
Laser-cut
132 Lamp mast retaining screw
2
Plated brass
M2 x 15 mm Order No. 704.15
133 Nut
2
Plated brass
M2, Order No. 710
134* Loudhailer
1
Plastic
Ready made
135 Aerial
1
Brass wire
1 Ø x 100 mm
136 Aerial base
1
Brass tube
2 / 1 Ø x 20 mm
Parts marked with an asterisk (*) are ready-made items; they are not included in the kit, but in the
Fittings Set, Order No. 611
as plan = make these parts as shown in the drawing
The following items are also required
(included in the kit)
1 decal sheet
2 washers, 2.8 / 7.0 Ø x 0.5 mm, Order No. 560.8
)
2 nuts, M2.5, Order No. 707
) funnel mounting
8 pushrod connectors
)
8 nuts, M2
8 grubscrews, M3
4 threaded pushrods, M2 x 225 (rudder / steam engine control)
The following items are also required
(not included in the kit)
Motor and accessories, electric version
1 motor, SPEED 900 BB Torque 12 V, Order No. 6373
1 motor bracket, Order No. 1711
1 drive battery, 12 V / 10 Ah, Order No. 2592
1 speed controller, NAVY V40R, Order No. 2875
4 retaining screws, 2.9 Ø x 13, Order No. 746.13
4 washers, 2.8 / 7 Ø, Order No. 560.8
