Grasselli NAB M, Техническое руководство

Страница: 30 / 92

NAB M
3.1. DESCRIPTION OF ESSENTIAL PARTS
Before using the machine read the safety information and instructions
with special care (Sect.1) .
Non-observance of these important instructions may cause accidents.
MAIN DISCONNECTING DEVICE. This device controls power supply to machine. It is located
on power socket where machine is connected on. Turning it onto 0 (zero) cuts off electric power
to machine.
It is the only switch that cuts off electricity correctly before effecting
maintenance.
DESCRIPTION OF CONTROLS AND ESSENTIAL PARTS see Pict. 2.7.1
4) RUBBER ROLLER COMB ASSEMBLY. It's compose from two comb fixing knobs and from
the rubber roller comb. Before removing the comb is necessary unscrewing the knobs.
10) BLADE HOLDER KNOBS. By screwing or unscrewing this knobs it is possible to adjust the
blade holder stretching more or minus.
Screw knobs (10) tightened
14) SISTEMA DI REGOLAZIONE NASTRO POSTERIORE . Permette di regolare l'inclinazione
del nastro posteriore. Occorre prima rimuovere le tre vivi di fissaggio poi, trovata la
posizione ideale, inserirle nelle rispettive sedi.
15) EMERGENCY BUTTON .It cuts off the work cycle of the machine. When this button is pressed
it is not possible, using machine controls, to operate any mechanism.
16) START BUTTON.
It starts up machine's work cycle. It must be pressed to restart machine
every time button (
15
) it has been pressed.
17) MASTER SWITCH. In its 0 position it cuts off power supply to whole machine. When switch
is in position 1, power supply is ON.