GRASS VALLEY UCP-3901, Руководство пользователя

Страница: 63 / 210

63
UCP - 3901
User Manual
Parameter Description
Ethernet Pane The Ethernet pane displays details of the currently selected network
interface, and allows a static IP address to be defined.
Rear - SFP 1 / 2: See Rear Panel and Connectors on page 24.
IP Address:
When Mode is set to
Static
, set the card’s IP address.
Default Gateway: When Mode is set to Static , set the network switch’s
IP address.
Subnet Mask: When Mode is set to Static , set the subnet mask for
your network.
Enter information as required, then click
to save. New settings are
applied when
Restart
is clicked.
New Mode Set the Ethernet port’s connection mode.
DHCP: The Ethernet port uses automatic configuration obtained from
the network's DHCP server.
Static: You set a fixed Ethernet port configuration ( IP Address ,
Default Gateway , and Subnet Mask ).
Restart Click when the New Mode setting is changed for this to take effect.
Only make this change during off hours as this can take up to 30
seconds to complete.
MAC Address Shows the Ethernet port’s MAC Address.
Mode Shows the Ethernet port’s current operating mode ( DHCP or Static ).
See New Mode to set the operating mode.
Link Status Shows the Ethernet port’s connections status with the network
switch.
UP: Connection successful
DOWN: Connection failed
SFP Status Shows the health status for the SFP cartridge.
OK: SFP cartridge detected and operational.
NONE: SFP cartridge unavailable.
SFP Fitted Shows if an SFP cartridge is present in the rear panel.
OK:
SFP cartridge detected.
NONE: SFP cartridge unavailable.
Location: Where
am I?
When set, the Where Am I function causes the SFP LEDs for the
relevant Ethernet connector to flash.
Clear Link Change
Count
If the state of the Ethernet link changes, the Link Change Count and
Link Change Time fields are updated. Click Clear Link Change Count
to reset the Link Change Count to zero.