GRASS VALLEY UCP-3901, Руководство пользователя

Страница: 121 / 210

121
UCP - 3901
User Manual
SFP Configuration
The
SFP Configuration
page allows various SFP parameters of the installed SFP cartridges
to be adjusted, if required.
The page panel has two sections (
SFP 1 Compatibility Control
and
SFP 2 Compatibility
Control ); one for each SFP cage. The configuration of the SFP 1 Compatibility Control is the
same as the SFP 2 Compatibility Control . Only the configuration of the SFP 1
Compatibility Control is shown below. To identify SFP 1 / 2, see Rear Panel and Connectors
on page 24.
Figure 5 - 41: SFP Configuration Page
The majority of SFPs will operate correctly with UCP - 3901 cards without any need for
adjustment. Some, however, may need to have card parameters set a little differently.
If difficulties are encountered with an SFP not working as expected, proceed as follows:
1 Select the appropriate SFP type from the
SFP Database List
, and click
Take
. Verify
whether the SFP is now working correctly; if so, no further action is required.
2 If the SFP is still not working properly, select
Custom
from the
SFP Database List
. This
allows all the parameters shown to be adjusted as required. Make changes and click
Take to apply them.
3 When a working configuration is found, the parameter values can be saved by clicking
beside each field.