GRAPHTEC CSX500 SERIES Скачать руководство пользователя страница 59

Страница: 59 / 84

4-1

CHAPTER 4 DAILY MAINTENANCE

4.1 Opening and Closing the Top Cover

Opening the top cover

(1) Turn off the scanner.
(2) Using both hands, push up the left and right open levers on the top cover to unlock them. While

still holding on to the levers, open the cover fully (approximately 47 degrees).

(3) When the top cover is fully open, the

xing stay operates to hold the top cover in place.

Closing the top cover

(1) Press the open cover down gently with both hands to close it.
(2) Check that the left and right open levers are locked into position.

Checkpoint

If the levers are not locked correctly, the ERROR LED

ashes and a scanning operation

cannot be performed.

Caution

• Take care not to get your

ngers caught when opening or closing the cover.

• When closing the top cover, please be careful not to pinch the document guides.

Содержание CSX500 SERIES





















































































Результаты поиска

Содержание CSX500 SERIES

Отзывы:

Похожие инструкции для CSX500 SERIES

Бренды по названию

Популярные бренды

GRAPHTEC CSX500 SERIES, Руководство пользователя

Результаты поиска

Содержание CSX500 SERIES

Отзывы:

Похожие инструкции для CSX500 SERIES

Бренды по названию

Популярные бренды