1-2
1.2 Part Names and Functions
Front View/Control Panel
Control Panel
(5) POWER button/LED
(6) PAPER LED
(7) ERROR LED
(8) EJECT key
(9) STOP key
(3) Top cover open levers
(4) Document guides
(2) Paper sensors
(1) Top cover
Front View
(1) Top cover ............................ Open the top cover to clean the document hold-down unit and
transparent contact plates.
(2) Paper sensors .................... These sense whether a document is present in the scanner.
(3) Top cover open levers ........ Press these levers to open the top cover.
If the top cover is opened during a scanning operation, the operation
will be stopped compulsorily.
(4) Document guides ............... Use these guides to determine the position of a document when you
load the document.
Control Panel
(5) POWER button/LED (blue)
................................. Controls the on/off status of the power supply to the scanner.
Lit: The scanner is turned on.
Flashing: Flashes when the scanner is in power-saving mode.
Unlit: The scanner is turned off.
(6) PAPER LED (green) ........... Lit: Lights when a document has been loaded.
Flashing: Flashes while image data is being scanned.
Unlit: Normal status (Local status).
(7) ERROR LED (red) .............. Lit: Lights to indicate a hardware error. (see Section 5.3)
Flashing: Lights to indicate a hardware error. (see Section 5.4)
Unlit: Normal status
(8) EJECT key .......................... Press this key to feed the document.
If this key is pressed when the scanner is in document-loaded status,
the document-loaded status is canceled and the document is ejected
to the front of the scanner.
If this key is pressed after the scanning operation has been canceled
or after scanning of the document was halted partway through the
scanning operation, the document-loaded status is canceled and the
document is ejected to the rear of the scanner.
(9) STOP key ........................... Compulsorily stops scanning/feeding of the document.
If the ERROR LED
fl
ashes when the top cover is in the closed status,
press this key to suspend the scanning operation and check whether a
paper jam has occurred.
