GRAPHTEC CE5000 SERIES, Руководство по обслуживанию

Страница: 54 / 146

CE5000-UM-251-9370 6-16
6 DISASSEMBLY AND REASSEMBLY
(6) Remove the two M4L6 binding head screws attaching the pen block.
Pen block
M4L6 binding
head screw
How to reinstall the pen block
(1) Attach the pen block to the Y-slider.
(2) Move the pen block to center of the Y bar and lower the pinch roller when measuring the pen block
height.
(3) Fasten the two M4L6 binding head screws to attach the pen block so that there is a gap of 10 mm
(CE5000-120AP: 11.5 mm) between the bottom of the pen block and the cutting mat. Perform a
visual check to make sure that the pen block is not mounted at an angle.
10 mm
Cutting mat
Side view of the pen block
CE5000-40/60/120:
11.5 mm
CE5000-120AP:
(4) Reattach the other parts in the reverse order in which they were detached.
(5) Perform the pen force adjustment (see Section 7.5).
(6) Perform the auto registration mark sensor offset adjustment for the CE5000-40/60/120 (see Section 7.9).