Granville-Phillips Micro-Ion 354 E Series, Инструкция по эксплуатации, Страница: 17 / 54

Micro-Ion E Module Instruction Manual 354011, Rev. A
17
Be
for
e
Yo
u Beg
in
Installa
tion
O
pe
ra
tio
n
Ove
rview
An
alog
O
p
e
ra
tio
n
M
ain
tena
nce
RS-
232
O
p
e
ra
tion
Chapter 3 Operation Overview
3.1 Analog versus RS–232
Operation Procedures
The module may have an analog output or an RS–232 output. The operating
procedure depends on the output.
3.2 Analog Operation
If the module has an analog output, the operation procedure includes
reading pressure, using the switches installed between wiring pins 1 and 2
(Micro-Ion E gauge ON/OFF), and reading Micro-Ion E gauge ON/OFF
status.
Table 3-1 lists tasks that may be performed if the module has an analog
output.
Using the module to measure the pressure of flammable
or explosive gases can cause a fire or explosion resulting
in severe property damage, personal injury, or death.
Do not use the module to measure the pressure of flammable or
explosive gases.
Table 3-1 Tasks and Page References for Analog Operation
Task Instructions:
Turn the Micro-Ion E gauge ON or OFF Page 20
Read Micro-Ion E gauge ON/OFF status Page 21
Read vacuum pressure Page 22