grandimpianti WR 11, Инструкция по установке и эксплуатации

Страница: 10 / 69

7
FOREWORD
Congratulations on your selection of our
washing machine. If you follow carefully
the present instructions you will certainly be
satisfied with its performance and guarantee.
In the event of claims or remarks, the refer-
ence text remains the original one in the
manufacturer’s native language, that is, the
Italian version.
1. GUARANTEE
- The guarantee has a validity of twelve (12)
months starting from the date of purchase of
the appliance or of any integral part of it.
- The guarantee covers the substitution of
any defective parts which are ensured as
having been caused during manufacture. The
warranty is applied directly by your dealer.
- Labour costs are always at to be met by the
purchaser, as well as transport, crating costs,
and transport risks.
- The guarantee is subordinated to the re-
stitution of damaged parts, which have to be
sent CARRIAGE PAID including all data
concerning the appliance, such as model,
serial number and defect of the machine
onto which the damaged part was assembled.
- The guarantee is not valid if the appliance
has been misused or if there have been mis-
takes in the electrical connections, wrong or
inappropriate installation, regardlessness of
the instructions given concerning assembly
and use or changes carried out by unauthor-
ised persons. The guarantee is void when the
serial number has been scratched or taken
off or altered in any way.
- The guarantee is not valid for the following
items: parts which are subject to a normal
wear like belts, valve membranes and rubber
parts in general, electric components like
motor, coils, contactors, heaters and so on.
2. INTRODUCTION
The present booklet has been formulated in
a simple and rational way, in order for the
reader to get deeply acquainted with the
washing machine. Please, read carefully and
keep with the machine. However, the warn-
ing and advice contained in this manual
cannot cover every possible contingency.
This is why it is important to underline that
common sense, carefulness and caution
cannot be supplied by the manufacturer, but
must be provided by those in charge of its
installation, maintenance and use.
Whoever operates the machine must
have read this manual beforehand.
In case of repairs, the manufacturer recom-
mends the use of original spare parts. Orders
are dealt with in chapter 8.
The descriptions and sketches reported in
this manual do not bind the manufacturer,
who reserves the right to update them and/
or include any upgrading modification of
parts and fittings if deemed necessary for
manufacturing or commercial purposes, at
any time and with no previous notice.
3. PRESCRIPTIONS, RESTRICTIONS
AND OTHER USES
The washing machine must be operated by
trained personnel only.
Disconnect it in case of malfunction and/or
faulty operation.
During use, cleaning and maintenance it is
absolutely necessary to be sure that tools or
hands are never stuck in the moving parts of
the appliance (motor, belts, etc.).
The manufacturer assumes no responsibility
for any personal injury arising while using,
cleaning or servicing the washing machine.
Do not open the soap dispenser while the
appliance is running, because of the substance
contained and also because of the temperature
of water.
This machine was designed to wash fabrics
according to the instructions of the labels,
appearing on garments. Wash only cloths,
household linen and ordinary fabrics.
Do not load the machine with fabrics that
have been in contact with inflammable or
chemical products. Otherwise, hand-wash
them first, and then air-dry to let those
substances evaporate.
The operation of any electric or electronic
appliance entails compliance with certain
basic rules and in this case particularly: do
not touch the machine with damp or wet
hands or feet; do not use it while bare-footed,
do not expose it to atmospheric agents like
rain, salt, salinity, etc. Do not allow its
operation by children or disabled persons
without proper supervision. Do not smoke
near the machine or during operation; do not
remove or ignore safety devices; do not
clean the machine by spilling water directly
or indirectly over it and therefore, install far
from such possibilities.
ANY USE NOT EXPRESSLY MEN-
TIONED HERE BELOW MUST BE
CONSIDERED AS HAZARDOUS. THE
MANUFACTURER ASSUMES NO
RESPONSIBILITY FOR ANY DA-
MAGE RESULTING FROM IM-
PROPER, WRONG OR UNREASON-
ABLE USE.
INSTRUCTIONS FOR THE
INSTALLER
4. TIPS ABOUT SHIPPING, UNPACK-
ING, MOVING AND STORING THE
MACHINE
4.1 SHIPPING
To move and/or ship the machine follow
carefully the ensuing recommendations:
Move the case on its own pallet or on a
similar platform; use a fork lift, either manual
or electric, provided it is adequate for hand-
ling such appliances and it has the requisite
lifting capacity (see technical data, chapter
8). Check that the appliance can surmount
every existing obstacle, like staircases, doors,
etc. Never drag it by the sides or by any
other part.
If the case must be shipped, use only the ori-
ginal packaging, which ensures sufficient
stability during transportation.
4.2 STORING
If the appliance must be stored for a long
period of time before being put into operation,
keep it inside its original package, as it gua-
rantees optimum protection. Store it in pre-
mises where ambient conditions comply with
the requirements of chapter 5. If the machine
must be out of service for a long period after
use, be sure it is materially disconnected
from the electric power supply and cover it
with its original plastic protection bag.
4.3 UNPACKING
1) Prior to accepting the case from the carrier,
check the conditions of the package. If it is
showing visible damage, the machine might
have suffered some consequences. If so,
unpack the machine in the presence of the
carrier and sign, under protest, the delivery
bill. The manufacturer assumes no liability
for any damage caused by transportation or
incorrect storage.
2) Unpack the appliance with the utmost
care to avoid damage. To take the pallet off,
remove the screws inside, which are on the
holes aimed for fastening the machine to the
floor.
3) Open the door (see paragraph 7.2).
4) Check that the following fittings are inside
the drum: two metal bands, 1 90
°
rubber
elbow, 2 3/4" threaded flexible tubes, 1*
brass strain for the steam inlet, 1* metal
flexible tube, nuts, washers and C-washers
corresponding to the number and diameter
of the fastening supports, lid opening keys
(optional), keys to the coin drawer, 15 coins
INSTRUCTIONS FOR INSTALLATION AND USE
GB
www.groupdynamics-laundry.com
sales@groupdynamics.lv