Graco Pro 230ES, Руководство по ремонту и запасным частям

Страница: 9 / 46

Installation
3A2817A 9
Trigger Lock
Always engage the trigger lock when you stop spraying
to prevent the gun from being triggered accidentally by
hand or if dropped or bumped.
Pressure Relief Procedure
Follow the Pressure Relief Procedure whenever
you see this symbol.
1. Turn power OFF and unplug sprayer.
2. Turn pressure to lowest setting.
3. Trigger gun to relieve pressure.
4. Turn prime valve down.
If you suspect spray tip or hose is completely clogged,
or that pressure has not been fully relieved after follow-
ing these steps,
VERY SLOWLY loosen tip guard retain-
ing nut or hose end coupling to relieve pressure
gradually, then loosen completely. Now clear tip or hose
obstruction.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection, splashing
fluid and moving parts, follow the Pressure Relief
Procedure when you stop spraying and before
cleaning, checking, or servicing the equipment.
ti8908a
Trigger Locked
Trigger Unlocked
ti8909a
ti2707a ti2718a
TIB
-
WASTE WASTE
ti2 5 99a
ti2719a