Graco Pro 230ES, Руководство по ремонту и запасным частям

Страница: 45 / 46

Technical Data
3A2817A 45
Technical Data
Pro 230ES Pro 270ES
Working pressure range 0-3000 psi (0-21 MPa, 0-207 bar)
Electric motor 11.0A (120 VDC)
(permanent magnet DC, TEFC)
5.5A (330 VDC)
(Permanent magnet brushless DC, TEFC)
Operating horsepower 1.0 1.4
Maximum delivery (with tip) 0.54 gpm (2.05 lpm) 0.70 gpm (2.65 lpm)
Paint hose 1/4 in. x 50 ft (6.4 mm x 15 m)
Maximum tip hole size 0.023 in. (0.58 mm) 0.027 in. (0.69 mm)
Weight, sprayer only 66 lb (30 kg) 72 lb (33kg)
Weight, sprayer, hose & gun 69 lb (31.4 kg) 75 lb (34 kg)
Dimensions:
Length 21 in. (53.3 cm)
Width 20.5 in. (52.1 cm)
Height 39.5 in. (100.3 cm)
Height (handle retracted) 29.5 in (74.9 cm)
Power cord 16 AWG, 3-wire, 10 ft (3.05 m) 14 AWG, 3-wire, 10 ft (3.05 m)
Fluid inlet fitting 7/8” - 14 UNF external thread
Fluid outlet fitting 1/4 NPSM external thread
Inlet screen (on suction tube) #12 mesh (1675 micron)
Wetted parts, pump & hose zinc-plated carbon steel, nylon, stainless steel, PTFE, acetal, chrome plating,
leather, UHMWPE, aluminum, carbide
Wetted parts, gun aluminum, brass, carbide, nylon, plated steel, stainless steel, UHMWPE, zinc
Generator requirement 3000 Watt minimum
Electrical power requirement 120 Vac, 60 Hz, 11A, 1 phase
Storage temperature range
◆❖
-30° to 160°F (-35° to 71°C)
Operating temperature range
✔
40° to 115°F (4° to 46°C)
◆
When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in pump.
❖
Damage to plastic parts may result if impact occurs in low temperature conditions.
✔
Changes in paint viscosity at very low or very high temperatures can afftect sprayer performance.