Installation
3A2817A
19
7.
Turn jam nut (29) counter-clockwise until it stops.
Tighten jam nut by hand, then tap 1/8 to 1/4 turn
with a 20 oz (maximum) hammer to approximately
75 ft-lb (102 N
•
m).
8.
Install suction tube (60) and high pressure hose
(45). Tighten fittings.
9.
Fill packing nut with Graco TSL until fluid flows onto
top of seal.
10. Replace cover (70) over screws. Push cover down
into place. Tighten screws (12).
ti19382a
45
60
ti19376a
Содержание Pro 230ES
Страница 21: ...Drive Housing Replacement 3A2817A 21 ti2570d 12 23 54 9 1 44 25 42 47 22 12 12 70 47 10 40 10 8 ...
Страница 28: ...On Off Switch Replacement 28 3A2817A Pro 270ES Wiring Diagram MOTOR ti7380a ...
Страница 34: ...Motor Replacement 34 3A2817A 47 ti2569c 48 49 6 12 50 47 15 59 40 44 42 54 47 1 1 Liberally apply grease 1 ...
Страница 36: ...Motor Replacement 36 3A2817A ti7434b 12 23 54 48 22 12 59 47 47 15 12 49 50 ...