Graco InvisiPac GS35 Plug-Free, Инструкция - Каталог запасных частей

Страница: 14 / 34

Troubleshooting
Problem Cause Solution
Heater failure Check and replace
heater cartridge. See
Replace Heater Cartridge, page 18 .
Loose cord set connection Check connection.
RTD failure Check and replace RTD. See
Check RTD, page 16 .
Incorrect RTD for adhesive delivery
system
Check delivery system RTD
requirement
Gun will not heat
Thermal cutoff is tripped Check and replace
thermal cutoff. See
Replace Thermal Cutoff, page 18 .
Heater failure Check and replace
heater cartridge. See
Replace Heater Cartridge, page 18 .
RTD failure Check and replace RTD. See
Check RTD, page 16 .
Incorrect RTD for adhesive delivery
system
Check delivery system RTD
requirement.
Gun overheats
Incorrect power to heater Check and correct power.
Heater failure Check and replace
heater cartridge. See
Replace Heater Cartridge, page 18
RTD failure Check and replace RTD.
Incorrect RTD for adhesive delivery
system
Check delivery system RTD
requirement.
Gun under-heats
Incorrect power to heater Check and correct power.
Module o-ring failure Check and replace o-ring. See
Replace Module, page 20 .
Inlet fitting loose Tighten fitting.
Manifold filter o-ring failure Check and replace o-ring.
Adhesive leaking from gun
Nozzle loose Tighten nozzle.
Solenoid valve failure Check and replace solenoid valve.
Adhesive pressure too high Check and reduce fluid pressure.
Solenoid valve connected
incorrectly
Check solenoid valve air connections.
Adhesive out of all modules
when not triggered
Module failure Check and replace all modules. See
Check Module, page 15 .
14 3A2805B