Graco Husky 1050e, Операция

Страница: 26 / 72

Cart Wiring
Cart Wiring
To avoid injury from fire, explosion, or electric
shock, all electrical wiring must be done by a
qualified electrician and comply with all local codes
and regulations.
See Wiring Tips, page 21 , for additional information
on wire routing.
NOTE: Use only copper wire with an insulation rating
of 75°Cor higher.
120V Cart-Mounted Models: A power cord is supplied
that can be plugged into any grounded 110V-120V
wall socket.
240V Cart-Mounted Models: See
Compressor Wiring, page 25 , Steps 1–3 and
Step 5 to wire power to the unit.
Cart Purchased Separately: If you are mounting
a non-cart model on a cart, wire the motor
and controller according to the directions in
Electrical Connections (AC Models), page 17 or
Electrical Connections (BLDC Models), page 20 . If
you have a compressor, wire the compressor to the
controller as shown in Figure 10 and according to
Compressor Wiring, page 25 .
26 334188P
Tel: 866-777-6060
Fax: 866-777-6383
Springer Pumps, LLC
Website: www.springerpumps.com
Int'l: +001 267 404 2910