Electrical Connections (BLDC Models)
Electrical Connections (BLDC Models)
To avoid injury from fire, explosion, or electric
shock, all electrical wiring must be done by a
qualified electrician and comply with all local codes
and regulations.
Connect Cables
The Graco Motor Control provides several
connections for CAN cable and system-specific I/O
devices. Connect according to the following table to
ensure that the cables in your system are connected
to the correct connectors on the Graco Motor Control.
NOTE: To maintain enclosure rating use approved
Type 4 (IP66) fittings and ensure either a cable or
plug is attached to all M12 and M8 connectors.
Table 1 Connector Information
Graco Motor Control
Label Identifier
Connector Type
Connector Use
1
M12, 8–position,
Female
Motor position and temperature feedback. Connect only to
Graco BLDCmotor with Graco cabling.
• 121683 (9.8 ft; 3.0 m)
• 17H349 (24.6 ft; 7.5 m)
• 17H352 (52.5 ft; 16 m)
2 (Spare)
M12, 5–position,
Female, B-Code
Not currently used.
3 and 4
M8, 4–position,
Female
See Table 2 for pinout and power specifications; must be
supplied by a Class 2 power source.
M12, 5–position,
Male, A-Code
CAN Power and Communication. Connect only to Graco
supplied cabling and modules. Connect to a maximum 30
VDC, Class 2 power source.
20
334188P
Tel: 866-777-6060
Fax: 866-777-6383
Springer Pumps, LLC
Website: www.springerpumps.com
Int'l: +001 267 404 2910
