25
►
Close the valves by pushing and twist
the green button clock- or anti clockwise
by a quarter turn. If valve is closed, the
green button stands out.
►
Insert the bayonet nozzle adapter of tube
of the inflation appliance (bellow pump,
electric- or other air pump), into the so-
cket of the airvalve and twist the bayonet
nozzle clockwise.
►
Inflate the float tubes to full operation
pressure (0.3 bar)
►
Cover the valve with the valve cap (ba-
yonet cap).
See „Valve - Inflation“ in the Operating Inst-
ructions - Part 2.
INflATE flOAT TUBES
1. Mast lower section with mast foot
2. Mast section with short shrouds
3. Mast section
4. Mast upper element with mast top
►
Slot the mast sections together.
►
Push the neoprene-protection over the
shrouds and fit a short and a long shroud
each, port and starboard, to the eyebolts
of the trampoline frame side rails.
►
Put the neoprene-protection over the
shackle.
RIGGING
►
Remove the safety bolt from the base of
the mast.
►
Put the mast onto the mast base ball joint
and replace the safety bolt.
►
Turn the mast lower part to the back.
