22
►
Place the two float tubes to the left and
right of the trampoline with the air valves
at the rear, and the lettering on the out-
side of the tubes.
flOAT TUBES
►
Place the float tubes sleeve sockets over
and push them onto the lugs of the frame
elements. The forward sockets fit over
the lugs from the rear, and the rear end
sockets from the front.
NOTICE: Each frame end has two lugs
to, 1 to fit into top side sleeve-socket of
the float tube, and 1 on the inward side.
USEfUl INfORMATION: If inserting
the frame lugs into the sleeve-sockets
proves difficult, apply some silicone
spray onto the lugs.
►
Insert the crossbars longer lugs forward
into front positioned sleeve sockets of
the floater tubes close to the bows.
►
Lift the other sockets and slide the shor-
ter lugs into them.
►
Push the crossbar both sides as far back
until it touches.
NOTICE: When using the bowsprit (ac-
cessory), first pull into onto the cross-
beam.
CENTERBORD
►
Slip the centerboard bracket over the
centre of the forward trampoline frame
element.
►
Insert both bolts from the top through the
pre-drilled holes and secure by means of
the wing nuts.
