GPS1195 Auto Gate Manual Version 3
Maintenance
The GPS1195 barrier gate will provide many years of reliable service if the following maintenance is
performed.
Monthly Maintenance
Check the drive belt tension regularly. Belt should be tight to provide for smooth gate arm
travel
Check belt for improper wear or cracks
Adjust limit cams as required, some small adjustments may be required during wide
temperature variations
Check the gear reducer oil level, if the oil is below the red dot then top up to the red dot
Check the gear reducer for leaks around the seals
Annual Maintenance
Drain and refill the gear reducer oil on an annual basis with 75W90 Synthetic Gear oil
Check and tighten as required all nuts and bolts
Check to insure the cabinet is securely mounted to the island
Check that all wiring, terminals, connectors, Etc., are secure and are electrically and
mechanically sound. Repair any deficiencies immediately
Wash and wax exterior surfaces
Belt tension adjustment
Work should be performed by a qualified service technician
Turn the power disconnect switch to the off position located on the lower right side of the
barrier gate
Remove the belt
Loosen and remove motor mounting clips
Remove motor from mounting bracket
Loosen motor mounting bracket nuts
Adjust height of mounting bracket to loosen or tighten belt tension
Tighten motor mounting bracket nuts
Install motor to mounting bracket, secure with mounting clips and tighten
Install the belt
Check for proper tension
Page 10
Содержание GPS1195
Страница 28: ......