GPS GPS-1000X Series, Руководство пользователя

Страница: 10 / 200

VIII User Manual
Document Overview
This manual introduces how to use the digital oscilloscope in details.
Quick Start Provide information about preparations before
using the instrument and a brief introduction of
the instrument.
To Set the Vertical System
Introduce the functions of the vertical system of
the oscilloscope.
To Set the Horizontal System Introduce the functions of the horizontal system
of the oscilloscope.
To Set the Sample System Introduce the functions of the sample system of
the oscilloscope.
To Trigger the Oscilloscope Introduce the trigger mode, trigger coupling,
trigger hold off, external trigger and various
trigger types of the oscilloscope.
Serial Trigger and Decode
Introduce how to trigger and decode the input
signal.
To Save Reference Waveform
Introduce how to save and display REF
waveform.
To Make Math Operation Introduce the math operation function of the
oscilloscope.
To Make Cursor Measurements Introduce how to use cursors to make
measurements.
To Make Measurements Introduce how to use measure function to
measure the waveform parameters.
Display Setting
Introduce how to set the display of the
oscilloscope.
Save and Recall
Introduce how to save and recall the
measurement result and the setting of the
oscilloscope.
System Setting
Introduce how to set the system setup.
Arbitrary Waveform Generation Introduce how to use Arbitrary waveform
generation function.
Default Introduce the Default setup of the oscilloscope
Troubleshooting
Introduce how to deal with common failures of
the oscilloscope.
Table of Content
Copyright and Declaration ..........................................................................
错误！未定义书签。
All Rights Reserved - General Polytronic Systems Ltd., London
www.gpslimited.com