Drop Invalid Packets:
If IP filtering is enabled, any invalid IP packets received by the unit
will be silently dropped. An invalid IP packet is one that cannot be identified for some
reason.
5.7.3.2.
Add Custom IP Filters
Fill in the parameters described below and click “Add …”. Your entry should appear in the
Custom IP Filters
table on the bottom of the page.
Figure 26
– Advanced Settings -> IP Filter, Add Custom IP Filter section
Note: Criteria are for inclusion by default. Select “exclude” if your criterion is for exclusion.
Filter Number:
Each IP filter is identified by a unique number from 1 to 20.
Source IP Address:
Any:
Any source IP address will satisfy these criteria
Specific:
A specific Host IP address
Range:
A range of IP addresses
Page 42 of 59
