5.4.
LAN Settings
Figure 14 -
LAN Settings Page
The LAN Settings page contains the basic configuration information required to customize
your LAN with the Logic-5000 radio modem as the network connection point. User
configuration will primarily occur on this page.
5.4.1.
IP Settings
5.4.1.1.
IP Configuration
Ethernet IP address:
LAN IP of the LOGIC-5000 radio modem. This address is entered
into a browser on a local PC when logging into the Logic-5000 radio modem home page. To
decrease the chances of unwanted access, this value should be changed from its default
prior to use.
IMPORTAT NOTE:
Changing this value will cause you to lose connection to the Logic-5000 unit.
Enter the new address in the browser to reconnect. If you forget an address or
make a mistake entering the new value, it may be difficult to reconnect to the
device.
Ethernet Subnet Mask:
The Subnet mask is used in conjunction with the Ethernet IP
address to partition the address into the network (subnet) portion and the host portion.
Page 29 of 59
