Warning: Be aware of the dynamic nature of the WAN IP Address as it can affect related
applications.
Subnet Mask:
This subnet mask is assigned by the carrier and is not configurable by the
user.
P-t-P:
WAN IP address of the network access point of the cellular carrier
CDMA Connection
Service Type:
Service Type indicates the type of service connection. The Logic-5000 radio
modem will automatically connect to the most advanced service available and will fall back
to other networks (such as 1xRTT) when EV-DO Rev A is not available.
Roaming Status:
Roaming Status indicates the unit roaming status. Status is ROAMING or
NOT ROAMING
ESN:
Electronic Serial Number is assigned to the cellular modem at the factory. This
number must be provided to the carrier to activate the module.
Signal Strength:
Receive Signal Strength Indication indicates the strength of the network
signal with both a numerical value and a good/medium/poor message.
Call End Reason:
Code indicating the reason for a call ending.
5.3.
Cellular WAN Parameters
This page contains the provisioning information and the carrier activation settings. For more
information on the procedure for carrier activation, see “Provisioning the Logic-5000 Radio
Modem”.
5.3.1.
Status
WAN Status information available (Figure 11):
ESN:
Electronic Serial Number is assigned to the cellular modem at the factory. This
number must be provided to the carrier to activate the module.
MDN/MTN:
The Mobile Directory Number; assigned by the carrier when the module is
activated.
MIN/MSI:
Mobile Identification Number, in most cases, this is the same as the MDN.
PRL:
Preferred Roaming List; a database that declares the priority of other carriers while
roaming. This file should be updated periodically to ensure proper connectivity while
roaming. The PRL file can be updated by performing an OTA or IOTA operation (see
provisioning section).
SID:
System ID, this is status only and is assigned by the carrier when connecting to the
network.
NID:
Network ID; this is status only and is assigned by the carrier when connecting to the
network.
Page 24 of 59