41
EN
• The stirring adapter is
fi
tted on
the cross-blade adapter.
• To take it back off, turn it gently
back and forth while pulling it
up and off.
Mixing bowl lid
The mixing bowl lid seals the mixing bowl. To prevent the food being processed or
cooked from spraying out, only operate the device once the lid has been properly
fi
tted
and locked.
Putting the lid on
ATTENTION!
■
Scalding hazard due to spraying of hot food being blended!
Before putting on
the lid, make sure that the sealing ring (
3
) is properly
fi
tted, is clean and not damaged
to ensure that the lid is properly sealed. If sealing ring is damaged, quickly replace
it – however, no later than every two years in any case.
• Fit the sealing ring (
3
) in the
groove along the edge of the
lid.
1. First place the mixing bowl lid
at the spout of the mixing bowl.
Insert the spout through the
slot in the lid.
2. Push the lid down until it audi-
bly locks into place under the
slider on the mixing bowl han-
dle.
1
2
09747_de-en-fr-nl_V3.indb 41
09747_de-en-fr-nl_V3.indb 41
11.12.2015 12:49:09
11.12.2015 12:49:09
Содержание SF501M
Страница 2: ...09747_de en fr nl_V3 indb 2 09747_de en fr nl_V3 indb 2 11 12 2015 12 49 00 11 12 2015 12 49 00 ...
Страница 126: ...09747_de en fr nl_V3 indb 126 09747_de en fr nl_V3 indb 126 11 12 2015 12 49 29 11 12 2015 12 49 29 ...
Страница 127: ...09747_de en fr nl_V3 indb 127 09747_de en fr nl_V3 indb 127 11 12 2015 12 49 29 11 12 2015 12 49 29 ...
Страница 128: ...09747_de en fr nl_V3 indb 128 09747_de en fr nl_V3 indb 128 11 12 2015 12 49 29 11 12 2015 12 49 29 ...