manualshive.com logo in svg

Gotting HG G-73650-A, Основы, пусконаладка и программное обеспечение

Поделиться
Скачать
Gotting HG G-73650-A Скачать руководство пользователя страница 26

Interfaces

HG G-73650-A

English, Revision 07, Date: 07.03.2018

25

3

Interfaces

The steering controller has several interface options providing data transmission. 
These include 2 CAN, 1 Profibus, 1 Ethernet and 4 serial RS232 interfaces. Addition-
ally the optional internal radio modem can be accessed via an integrated interface. 
This chapter provides an overview of the different interfaces. In the annex of the refer-
ence manual you will find a tabular listing of the data actually transferred.

NOTE!

You will find the hardware description of the interfaces in the pro-
vided user manual for control unit HG 61430.

3.1

CAN Bus

Detailed specifications of the CAN messages are described in the reference manual.

3.1.1

CAN 1

Interface 1 is responsible for the communication of general functions of the steering

 

controller. These are:

•

status information of the steering controller

•

steering angle, nominal velocity etc.

•

position output of internal sensor fusion

•

communication with vehicle control unit (segments, status of vehicle, etc.)

•

communication with transponder antenna

•

communication with gyro

•

communication with IO extension 

3.1.2

CAN 2

Interface 2 is responsible for the communication of the additional functions of the

 

steering controller. These include:

•

communication with the laser scanner

•

communication with the steering servo

•

communication with the angle sensor (for backward movement of the 
trailer)

•

communication with guide wire antenna 

HG 73350

•

communication with evaluation unit for 2 cameras 

HG 738840

•

command box of the gyro

•

remote control of the basic features with CAN Bus

Содержание HG G-73650-A













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды