Device Description HG G-19370-B/HG G-19380-B | English, Revision 03 | Date: 05.05.2020
20
Chapter 6 – Configuration
6.4 Service Program
When the connection inside the Terminal Program (see above) is successfully estab
-
lished press any key to make the following main menu appear.
6.4.1 Main Menu
The main menu differs for the sensor versions. For version HG G
-
19370ZB/HG G-
19380ZB an additional CAN menu is available. The main menu always shows the
five guide wire frequencies and the frequency of the energy track as well as the cor
-
responding actual sum and difference values.
6.4.1.1 HG G-19370/80ZB (CAN)
Figure 10
HG G-19370/80ZB (CAN): Main menu
6.4.1.2 HG G-19370/80YB (Profinet)
Figure 11
HG G-19370/80YB (Profinet): Main menu
Frequency config, s. section 6.4.2 on page 21
Calibration config, s. section 6.4.3 on page 21
Encoder config, s. section 6.4.4 on page 22
CSV, s. section 6.4.5 on page 23
CAN config, s. section 6.4.6 on page 24 (only visible for version HG G-
19370ZB/HG G-19380ZB)
Firmware Update, s. section 6.4.5 on page 23
HG 19370 ZB V1.01 Main menu Goetting KG
Frequencies: 5000 6000 7000 8000 10000 25000
Sum: 0 0 0 0 358 0
Dif: 0 0 0 0 0 0
Encoder: 0
1: Frequency config
2: Calibration config
3: Encoder config
4: Serial Data-Stream
5: CAN config
U: Firmware Update
HG 19370 YB V1.01 Main menu Goetting KG
Frequencies: 5000 6000 7000 8000 10000 25000
Sum: 0 0 0 0 358 0
Dif: 0 0 0 0 0 0
Encoder: 0
1: Frequency config
2: Calibration config
3: Encoder config
4: Serial Data-Stream
U: Firmware Update
