Gorilla Playsets Pioneer Peak 1500DW, Руководство пользователя

Страница: 61 / 188

BOTH ENDS WITH A1/8" DRILL BIT AT THE DIMENSIONS SHOWN BELOW. THE HOLE AT 20-3/16" IS THE CENTER OF THE
STEP 8: DECK SPACERS
BOARD AND ONLY NEEDS TO BE DRILLED ONCE. THIS HOLE IS TO ATTACH THE CENTER DECK SUPPORT TO THE
DECK SPACER.
THE FOLLOWING STEP IS RECOMMENDED TO PREVENT POSSIBLE SPLITS IN THE WOOD
1: PRE-DRILL THE ENDS OF THE 5/4 X 4 X 40-3/8" DECK SPACERS TO PREVENT INSTALLATION DAMAGE. PRE-DRILL
2: PLACE THE 5/4 X 4 X 40-3/8" DECK SPACER AT ONE END OF THE FORT. CENTER THE BOARD BETWEEN THE
CORNER POSTS AND ATTACH IT WITH 2" WOOD SCREWS THROUGH THE PREDRILLED HOLES AND INTO THE DECK
SUPPORT BELOW. NOTE THE TOP OF THE SCREW HEAD SHOULD BE FLUSH TO THE TOP OF THE DECK SPACER.
THIS IS THE CENTER OF THE
BOARD. THIS HOLE ONLY
NEEDS TO BE DRILLED ONCE.
5/4 X 4 X 40-3/8"
DECK SPACER
8
3
1
1"
8 "
20 "
3
"
16
16
11
" 2
1 11
16 "
REMOVED FOR CLARITY.
2" WOOD SCREW
NOTE: BOTTOM PANEL BOARDS AND END PANEL BOARD
5/4 X 4 X 40-3/8"
DECK SPACER
FRONT OF FORT
51