Gorilla Playsets 1500KWR, Руководство пользователя

Страница: 72 / 188

DECK BOARD
5/4 X 6 X 47-3/8"
2" WOOD SCREW
A 1/8" DRILL BIT AT THE DIMENSIONS SHOWN BELOW.
STEP 12: DECK BOARDS
THE FOLLOWING STEP IS RECOMMENDED TO PREVENT POSSIBLE SPLITS IN THE WOOD
1: PRE-DRILL THE ENDS OF THE DECK BOARDS TO PREVENT INSTALLATION DAMAGE. PRE-DRILL BOTH ENDS WITH
2: START WITH A 5/4 X 6 X 47-3/8" DECK BOARD AT ONE END OF THE FORT. CENTER THE BOARD BETWEEN THE
FRONT FACE BOARD AND THE REAR BOTTOM PANEL BOARD AND ATTACH IT WITH 2" WOOD SCREWS THROUGH
THE PREDRILED HOLES AND INTO THE DECK SUPPORTS BELOW. LEAVE A UNIFORM (APPROX. 1/4") SPACE
BETWEEN THE DECK BOARDS. NOTE: THE TOP OF THE SCREW HEAD SHOULD BE FLUSH TO THE TOP OF THE DECK
BOARDS.
LAY ALL DECK BOARDS ACROSS THE DECK SUPPORTS BEFORE SECURING THEM TO THE
FORT. THIS WILL ENSURE THAT YOU HAVE EQUAL SPACING ACROSS THE DECK.
5/4 X 6 X 47-3/8" DECK BOARD
" 4 8
1 8
1
3 "
1
8 "
"
16
4
23 11
"
1
"
8
1 8
3
"
1
8
4
2 3 "
4
4
1
8 "
64