Freestanding Play
J:\SPECS\SPECS1\185\18578200.P65
Document #18578200
Seesaw Assembly
2
Replace if welds are broken, or if
the assembly is deformed, or se-
verely pitted with corrosion. Re-
pair damaged powdercoating per
instruction sheet.
Polyurethane Rod
1
Replace if the Seesaw pivots freely
and lacks resistance, the mecha-
nism binds, or metal-to-metal con-
tact is noted.
Sheep Seesaw
Seesaw
Assembly
Base
Assembly
DETAIL
LEG ATTACHMENT
Base Assembly
156257-00
Base Assembly
2
Replace if welds are broken, or if
the assembly is deformed, or se-
verely pitted with corrosion. Repair
damaged powdercoating per in-
struction sheet.
Leg
2
Replace if welds are broken, or if
the assembly is deformed, or or se-
verely pitted with corrosion pitted
with corrosion.
(4)
1
/
2
" x 1
1
/
4
" Hex
Cap Screws
100216-00
Leg
148881-00
(4)
1
/
2
" Standard
Hex Nuts
129692-00
© 2012 by Landscape Structures.
(4)
1
/
2
" Flat
Washers
100363-00
(4)
1
/
2
" Flat
Washers
100363-00
Bolt Covers/Permalene 1
Replace if plastic is cracked,
embrittled or seriously discolored.
Permalene
Surfacing
1
Surfacing should cover the base
of the seesaw with a 2"- 4"depth
and be level throughout the area.
(Please see Leg Attachment De-
tail) Warning: The seesaw de-
pends on correct surface height to
stop excessive movement. Ne-
glecting surfacing will lead to pre-
mature rubber failure.
2"-4"
Surfacing
Sheet 1 of 2
NOTE: Surfacing must
be maintained between
2"-4" above the bottom
of the base.
Fasteners
1
Tighten attachment fasteners. Re-
place if cracked, deformed or bro-
ken.
General Materials/Finishes 1
Refer to the General Cleaning/Re-
pairing Instructions found in the
"Freestanding Play System Play-
ground Maintenance Sheet."
Bushings
1
Replace if mechanism binds or
metal-to-metal contact is noted.
Handles
Footrests
Handles/Footrests
1
Replace if cracked, deformed, or
broken. Repair damaged
powdercoating per repair sheet.