Gorilla Playsets 1500KWR, Руководство пользователя

Страница: 131 / 188

1: WITH A PENCIL MAKE A CENTER MARK ON THE OUTSIDE FACE OF THE 1 X 4 X 19.31 WALL
PANEL BOARD, MEASURE 4-7/8" HORIZONTALLY FROM THE OUTSIDE EDGE OF THE CORNER POST
TOWARDS THE CENTER OF THE WALL PANEL BOARD AND 2-3/8" FROM THE BOTTOM EDGE OF
THE WALL PANEL SUPPORT TOWARDS THE CENTER OF THE WALL PANEL BOARD AS SHOWN IN
THE DIAGRAM BELOW.
2: PARTIALLY INSERT A #8 X 1" WOOD SCREW INTO THE WALL PANEL BOARD CENTER MARK
FROM PREVIOUS SUB-STEP, MAKE SURE THE HEAD OF THE SCREW IS STICKING OUT ABOUT 3/8"
FROM THE OUTSIDE FACE OF THE WALL PANEL BOARD.
3: MOUNT THE SOLAR WALL LIGHT ONTO THE WALL USING THE HEAD OF THE WOOD SCREW AS
A HANGER IN TO THE SLOT LOCATED IN THE BACK OF THE SOLAR WALL LIGHT.
THE ON/OFF
SWITCH IS LOCATED IN THE BOTTOM REAR END OF THE SOLAR WALL LIGHT, YOU CAN ACCESS TO
THIS SWITCH BY SWINGING THE SOLAR WALL LIGHT TOWARDS THE OUTSIDE OF THE CORNER POST.
4: REPEAT SUB-STEPS 1 TO 3 FOR THE OTHER SIDE.
STEP 71: SOLAR WALL LIGHTS
ON / OFF SWITCH
SWING THE SOLAR WALL LIGHT
TOWARDS THE OUTSIDE
WALL PANEL BOARD
CORNER POST
SOLAR WALL LIGHT
1 X 4 X 19.31"
1" WOOD SCREW
4-7/8"
2-3/8"
123