background image

12. Burns can occur from touching hot metal parts, hot water or steam. Use

caution when using the appliance. If the iron is placed onto the iron rest

plate during in use, the iron rest plate may become a hot surface. Do

not touch the iron rest plate and the sole-plate until they have cooled

down completely.

13. Never use the iron facing towards people because the steam can cause

burns.

14. The iron must not left unattended while it is connected to the supply

mains.

15. The plug must be removed from the socket-outlet before the water

reservoir is filled with water.

16. The iron must be used and rest on a stable surface.

17. When placing the iron on its stand, ensure that the surface on which the

stand is placed is stable.

18. The iron is not to be used if it has been dropped, if there are visible

signs of damage or if it is leaking.

19. If the supply cord is damaged, it must be replaced by the manufacturer,

its service agent or similarly qualified persons in order to avoid a

hazard.

20. The appliance is not intended for use by children or other persons

without assistance or supervision if their physical, sensory or mental

capabilities prevent them from using it safety.

21. This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for

their safety.

22. Children should be supervised to ensure that they do not play with the

appliance.

Содержание G-980STJ-E














Отзывы: