Use of your iron
1.Fill reservoir
1. Turn steam control & self clean knob to “ ”.
2. Hold the iron in horizontal position. Open water fill cover, using a
measuring cup or other equipments to fill water into reservoir up to Max
filling level.
3. Hold the iron in horizontal direction, and then move the iron front and
back for about 30 seconds so that limescales in water can be purified
by the ion exchange resin in the water cleaning box. If your local water
is too hard,it is supposed to mix it with distilled water in a proportion of
50%.
2.Temperature Setting and Indication
1. Connect the appliance to main socket, power indicator light “ ” ON,
temperature display indicates OFF. The iron is at standby mode.
2. Once press temperature setting button, temperature setting indicator
will roll to another setting. Always this will cycle as follows “ ” > “silk”
> “plyster” > “cotton” > “linen” > “ ” > “silk” , meanwhile, desired
temperature shows on temperature display; iron does not be heated up.
While set temperature, corresponding temperature indicator light and
temperature display blink. No action to temperature setting button for 3
seconds, the temperature showing on temperature display is the actual
temperature of the centre point of the soleplate. The temperature
showing on temperature display will be changed along with the
soleplate being heated up. When desired temperature has been
reached, the buzzer alarms one sound, temperature setting indicator
light turns on steadily, temperature display shows actual measured
temperature of soleplate.
