3. It is normal that sometimes temperature indicates on temperature
display is out of the range of set temperature during steam ironing.
4.Dry ironing
1. Set steam control and self clean knob to “ ” position, fill reservoir with
water(refer to Fill Reservoir)
2. Connect to main socket, choose suitable temperature according to
Fabric Setting Chart. Temperature setting indicator light blinks to
indicate that the iron start being heated up. Temperature shown on
temperature display will not changed all along during heating.
3. When temperature setting indicator light steadily lights up, buzzer
alarms once to indicate that desired temperature has been reached,
and temperature shown on temperature display is within the range of
set temperature, it is ready for dry ironing now.
4. If water spray is necessary, please press Spray button successively,
water can be evenly in the fabric(Note: When first time use spray
function, please press Spray button for many a times)
5. After use, please disconnect from main socket.
Note:
After dry or steam ironing, change temperature setting button from higher
settings to lower, it is proposed not to start ironing immediately since burns
may cause on your fabrics by high temperature. Please wait for the
temperature display indicator light steadily lights up and then start ironing.If
need to speed up cooling, open the steam knob to produce the steam about
1 minute, till the power indicator light change from flash to brightness,and
then you can start ironing.
